HP LaserJet Enterprise M552 - Page 220

Table 2-33 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Print Quality
(continued)
Tray X Sensing
(M552/M553)
Tray >1 Sensing
(M577)
Expanded sensing*
Transparency Only
When conguring the
Auto Sense Mode
option for Tray 1 and
Tray 2, the <x>
variable represents
the highest number of
trays installed on the
printer.
Adjust Paper Types Select from a list of
paper types that the
printer supports. The
available options are
the same for each
paper type.
Print Mode Select from a list of print
modes.
Changing the Print
Mode setting is usually
the rst thing to try to
resolve print-quality
problems. Problems
can include toner not
sticking well to the
page, a faint image of
the page repeated on
the same or following
page, incorrect gloss
level, etc.
Resistance Mode Normal*
Up
Down
Use this setting to
correct print quality
problems in low-
humidity
environments and
highly resistive paper.
Use the Up option to
solve print quality
problems that are
related to poor toner-
transfer. Use the Down
option in the event
that small, “pin-hole”
defects occur.
Humidity Mode Normal*
Alternate 1 (M552/M553)
Alternate 2 (M552/M553)
Alternate 3 (M552/M553)
High (M577)
Use this setting to
correct print quality
problems in high
humidity
environments. Use the
alternate settings if
the printer is in a high
humidity environment
and it is experiencing
problems with low
toner density on the
rst page of a job.
Pre-Rotation Mode O
On*
Fuser Temp Mode Up
Down
Normal*
Use this feature to
eliminate ghost
images on printed
pages.
192 Chapter 2 Solve problems ENWW