The 550 Sheet feeders can be stacked for 3 extra trays. These trays have all the same sensors and
connectors.
●
13.A3.D3
Media did not reach the Tray 3 feed sensor in the designated amount of time printing from Tray 3.
●
13.A3.D4
Media did not reach the Tray 3 feed sensor in the designated amount of time printing from Tray 4.
●
13.A3.D5
Media did not reach the Tray 3 feed sensor in the designated amount of time printing from Tray 5.
Recommended action
1. Open Tray X, remove any jammed paper, and then close the tray.
2. Open and close the upper right door to allow the printer to attempt to clear the jam.
274 Chapter 2 Solve problems ENWW
To Next Page
Loading...