6. Lower the document-feeder input tray.
7. Close the document-feeder cover.
NOTE: Verify that the latch on the top of the
document-feeder cover is completely closed.
Misfeed or no-pick errors might occur if the
document-feeder cover is not completely closed.
NOTE: To avoid jams, make sure the guides in the document-feeder input tray are adjusted against the
document, without bending the document. To copy narrow documents, use the atbed scanner. Remove all
staples and paper clips from original documents.
NOTE: Original documents that are printed on heavy, glossy paper can jam more frequently than originals
that are printed on plain paper.
ENWW Solve paper handling problems 453
To Next Page
Loading...