Juniper JUNOS - NETWORK OPERATION GUIDE REV1 User Manual

Using the Basic Monitoring Method ! 79
Chapter 11: Understanding the Method and Tools for Monitoring Router Components
Temperature The chassis temperature
exceeded 55 degrees, the fans
turned on to full speed, and
one or more fans failed.
! Check the room
temperature.
! Check the air filter
and replace it.
! Check the air flow.
! Check the fan.
Yellow
The chassis temperature
exceeded 65 degrees C and
the fans turned on to full
speed.
! Check the room
temperature.
! Check the air filter
and replace it.
! Check the air flow.
! Check the fan.
Yellow
The chassis temperature
exceeded 65 degrees C and a
fan failed. If this condition
persists for more than 4
minutes, the router shuts
down.
! Check the room
temperature.
! Check the air filter
and replace it.
! Check the air flow.
! Check the fan.
Red
Chassis temperature exceeded
75 degrees C. If this condition
persists for more than 4
minutes, the router shuts
down.
! Check the room
temperature.
! Check the air filter
and replace it.
! Check the air flow.
! Check the fan.
Red
The temperature sensor failed. For technical support,
open a support case
using the Case Manager
link at
http://www.juniper.net
/support/
or call
1-888-314-JTAC (within
the United States) or
1-408-745-9500 (outside
the United States).
Red
Chassis
Component
Alarm Condition Remedy
Alarm
Severity

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Specifications

General

Brand	Juniper
Model	JUNOS - NETWORK OPERATION GUIDE REV1
Category	Software
Language	English