Juniper JUNOS - NETWORK OPERATION GUIDE REV1 User Manual

Basic Router Component Monitoring Method ! 47
Chapter 11
Understanding the Method and Tools for
Monitoring Router Components
This chapter describes the method and tools you use to monitor and isolate
problems on router hardware components. It includes the following information:
! Basic Router Component Monitoring Method on page 47
! Basic Router Component Monitoring Tools on page 49
! Using the Basic Monitoring Method on page 55
Basic Router Component Monitoring Method
Figure 11 shows the basic method you use to monitor router hardware components.
Figure 11: Basic Method for Monitoring Router Components
You should routinely monitor the status of all Juniper Networks routers running on
the network.
Gather
alarm
information
Verify
problem
Fix
problem
Contact
JTAC
Check
component
status
Done
Return
component
No?
Yes?
Ok?
No?
1599

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Specifications

General

Brand	Juniper
Model	JUNOS - NETWORK OPERATION GUIDE REV1
Category	Software
Language	English