JUNOS Internet Software Network Operations Guide: Hardware
368 ! Returning the MCS
What It Means The command output displays the MCS slot number, revision level, part number,
and serial number. Give this information to the Juniper Networks Technical
Assistance Center (JTAC) if the MCS fails.
Step 2: Locate the MCS Serial Number ID Label
Action To locate the MCS serial number ID label, look on the bottom left side of the board,
as shown in Figure 152.
Figure 152: MCS Serial Number ID Label
Returning the MCS
Action To return the MCS, see “Replacing a Failed Component” on page 122, or the
procedure to return a field-replaceable unit in the M40e or M160 router hardware
guide.
1616
Serial number ID label
AA1234
To Next Page
Loading...
Need help?
General
