EasyManuals Logo

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 User Manual

Juniper JUNOS - NETWORK OPERATION GUIDE REV1
722 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #518 background imageLoading...
Page #518 background image
JUNOS Internet Software Network Operations Guide: Hardware
482 ! Manually Switching Routing Engine Mastership
Manually Switching Routing Engine Mastership
Action To manually switch the Routing Engine mastership, use one of the following CLI
commands.
! From the backup Routing Engine, request the backup Routing Engine to acquire
mastership:
user@host> request chassis routing-engine master acquire
user@host> request chassis routing-engine master acquire
warning: Traffic will be interrupted while the PFE is re-initialized
Attempt to become the master routing engine ? [yes,no] (no)
Resolving mastership...
Complete. The local routing engine becomes the master.
! From the master Routing Engine, request the backup Routing Engine to acquire
mastership:
user@host> request chassis routing-engine master release
user@host> request chassis routing-engine master release
Traffic will be interrupted while the PFE is re-initialized
Request the other routing engine become master ? [yes,no] (no)
Resolving mastership...
Complete. The other routing engine becomes the master.
! Switch mastership from either the backup or master Routing Engine:
user@host> request chassis routing-engine master switch
If graceful-switchover is not configured, the command output looks as follows:
user@host> request chassis routing-engine master switch
warning: Traffic will be interrupted while the PFE is re-initialized
Toggle mastership between routing engines ? [yes,no] (no) yes
Resolving mastership...
Complete. The local routing engine becomes the master.
user@host> request chassis routing-engine master switch
If graceful-switchover is configured the command output looks as follows:
Toggle mastership between routing engines ? [yes,no] (no) yes
Resolving mastership...
Complete. The other routing engine becomes the master.
What It Means When you enter the request chassis routing-engine master acquire command on the
backup Routing Engine, you see the following:
warning: Traffic will be interrupted while the PFE is re-initialized
Attempt to become the master routing engine ? [yes,no] (no).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS - NETWORK OPERATION GUIDE REV1 and is the answer not in the manual?

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS - NETWORK OPERATION GUIDE REV1
CategorySoftware
LanguageEnglish

Related product manuals