Juniper JUNOS - NETWORK OPERATION GUIDE REV1 User Manual

Documentation Conventions ! xxix
About This Manual
! Alternative Actions—Describes other commands or ways of doing the task.
! Syntax—Describes the full syntax of the command or configuration statement.
For an explanation of how to read the syntax statements, see “Documentation
Conventions” on page xxix.
Documentation Conventions
Table 1 defines notice icons used in this guide.
Table 1: Notice Icons
Table 2 defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
Icon Meaning Description
Informational note Indicates important features or instructions.
Caution Indicates a situation that might result in loss of data or
hardware damage.
Convention Element Example
Bold sans serif typeface
Represents text that you type. To enter configuration mode, type the configure
command:
user@host> configure
Fixed-width typeface
Represents output on the terminal screen.
user@host> show chassis alarms
No alarms currently active
Italic typeface ! Introduces important new terms.
! Identifies book names.
! Identifies RFC and Internet draft titles.
! A policy term is a named structure that defines
match conditions and actions.
! JUNOS System Basics Configuration Guide
! RFC 1997, BGP Communities Attribute
Italic sans serif typeface
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Configure the machine’s domain name:
[edit]
root@# set system domain-name domain-name
Sans serif typeface
Represents names of configuration
statements, commands, files, and
directories; IP addresses; configuration
hierarchy levels; or labels on routing
platform components.
! To configure a stub area, include the stub
statement at the
[edit protocols ospf area area-id]
hierarchy level.
! The console port is labeled CONSOLE.
< > (angle brackets) Enclose optional keywords or variables.
stub <default-metric metric>;
|
(pipe symbol) Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
broadcast | multicast
(string1 | string2 | string3)
#
(pound sign) Indicates a comment specified on the
same line as the configuration statement
to which it applies.
rsvp { # Required for dynamic MPLS only

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Specifications

General

Brand	Juniper
Model	JUNOS - NETWORK OPERATION GUIDE REV1
Category	Software
Language	English