Juniper JUNOS - NETWORK OPERATION GUIDE REV1 User Manual

CLI Configuration Mode ! 643
Appendix A: Command-Line Interface Overview
Table 135 describes each top-level CLI configuration mode statement.
Table 135: Configuration Mode Top-Level Statements
Statement Description
accounting-options Configure accounting statistics data collection for interfaces and firewall
filters. For information about the statements in this hierarchy, see the JUNOS
Network Management Configuration Guide
.
chassis Configure properties of the router chassis, including the clock source,
conditions that activate alarms, and SONET/SDH framing and concatenation
properties. For information about the statements in this hierarchy, see the
JUNOS Interfaces and Class of Service Configuration Guide
class-of-service Configure class-of-service parameters. For information about the statements
in this hierarchy, see the JUNOS Interfaces and Class of Service Configuration
Guide.
firewall Define filters that select packets based on their contents. For information
about the statements in this hierarchy, see the JUNOS Policy Framework
Configuration Guide.
forwarding-options Define forwarding options, including traffic sampling options. For
information about the statements in this hierarchy, see the JUNOS Interfaces
and Class of Service Configuration Guide.
groups Configure configuration groups.
interfaces Configure interface information, such as encapsulation, interfaces, virtual
channel identifiers (VCIs), and data-link channel identifiers (DLCIs). For
information about the statements in this hierarchy, see the JUNOS Interfaces
and Class of Service Configuration Guide.
policy-options Define routing policies, which allow you to filter and set properties in
incoming and outgoing routes. For information about the statements in this
hierarchy, see the JUNOS Routing and Routing Protocols Configuration Guide.
protocols Configure routing protocols, including Border Gateway Protocol (BGP),
Intermediate System-to-Intermediate System (IS-IS), Open Shortest Path First
(OSPF), Routing Information Protocol (RIP), Multiprotocol Label Switching
(MPLS), Label Distribution Protocol (LDP), and Resource Reservation Protocol
(RSVP). For information about the statements in this hierarchy, see the
chapters that discuss how to configure the individual routing protocols in the
JUNOS Routing and Routing Protocols Configuration Guide and the JUNOS
MPLS Applications Configuration Guide.
routing-instances Configure multiple routing instances. For information about the statements
in this hierarchy, see the JUNOS Routing and Routing Protocols Configuration
Guide.
routing-options Configure protocol-independent routing options, such as static routes,
autonomous system (AS) numbers, confederation members, and global
tracing (debugging) operations to log. For information about the statements
in this hierarchy, see the JUNOS Routing and Routing Protocols Configuration
Guide.
snmp Configure Simple Network Management Protocol (SNMP) community strings,
interfaces, traps, and notifications. For information about the statements in
this hierarchy, see the JUNOS Network Management Configuration Guide.
system Configure systemwide properties, including the hostname, domain name,
Domain Name System (DNS) server, user logins and permissions, mappings
between hostnames and addresses, and software processes.

Juniper JUNOS - NETWORK OPERATION GUIDE REV1 Specifications

General

Brand	Juniper
Model	JUNOS - NETWORK OPERATION GUIDE REV1
Category	Software
Language	English