Operating elements for crane operation
8.2 Brief description of the operating elements
Operating Instructions GMK5250L 3 302 633 en 8 - 99
27.09.2017
Menu selection
Pre-select high-speed/normal speed mode
Outrigger menu The operating elements for the outriggers are only active when the
Outrigger menu is open.
Outrigger menu
Operating the left outriggers (next to control unit)
Button (5) or (6) is pressed.
Movement stops after the button is released, and when an end position is
reached.
s
Selection: Press the button – the next menu is shown on the
Outrigger display
1Pre-select: Press button – high-speed mode pre-selection on
2Pre-select: Press button – normal speed pre-selection on
– To open: Press button (2) repeatedly until display (1) appears.
1Retract: Press button – outrigger beam retracts
1)
2 Extend: Press button – outrigger beam extends
1)
3Retract: Press button – outrigger cylinder retracts
4 Extend: Press button – outrigger cylinder extends
1)
only on operator's side
Outrigger beams;
à p. 11 - 46
Supporting cylinders;
à p. 11 - 54
To Next Page
Loading...
