Mitsubishi Electric Q12DCCPU-V - Using Development Environment (Personal Computer); Remote PAUSE from Development Environment (Personal Computer)

4
FUNCTIONS
4.3 Remote Operation Function
4.3.2 Remote PAUSE
4 - 10
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(b) Using development environment (personal computer)
In <<Online operation>> of C Controller setting utility, perform as described below.
1) Set "Remote operation" to "PAUSE" and select a C Controller module or
programmable controller CPU.
2) Click to execute remote PAUSE.
(4) Precautions
The user program will not stop even if the C Controller module is placed in the remote
PAUSE status. (Operation continues inside the C Controller module.)
To change the program processing according to the operation status of the C
Controller module, utilize bus interface functions (QBF_ReadStatusEx) in
programming.
Remark
The operation status of the C Controller module can be confirmed by the
following.
• Bus interface function (QBF_ReadStatusEx)
• C Controller setting utility ("CPU operation status" on <<Module
information>>)
Figure 4.3 Remote PAUSE from development environment (personal computer)
Execute
2) Click
Execute button.
1) Set "PAUSE" and select
a C Controller module
or programmable
controller CPU.