Mitsubishi Electric Q12DCCPU-V - Accessing the C Controller Module; Monitoring the C Controller Module Status

6 - 42
6.6 Network Settings for 1:1 Connection
6
PREPARATORY PROCEDURES AND SETTING
(d) Accessing the C Controller module
Check the "Write authority" box and enter the login user information (User name
and Password Page 6-89, Section 6.11.2).
Click the button to access the C Controller module with the write
authority enabled.
POINT
1. When the C Controller module is not accessible, issue a PING command from
the development environment (personal computer) to the C Controller module
to check the presence.
2. Disable Windows
®
Firewall when connecting the development environment
(personal computer) to the C Controller module.
For Windows
®
Firewall setting, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
(4) Monitoring the C Controller module status
Communications with the C Controller module are available from C Controller utility
after the connection is complete.
In the tabs such as <<Module information >>, <<Event history>>, and <<Module
monitoring>>, check that relevant information can be monitored.
Figure 6.36 Connection settings screen
Figure 6.37 Module information tab (Q12DCCPU-V)
Connect