Mitsubishi Electric Q12DCCPU-V - Link Device Refresh Cycle Setting Flowchart

5
ACCESS VIA NETWORK MODULES
5.3 MELSECNET/H Module Access Function
5.3.4 Link device refresh setting
5 - 23
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(b) How to determine the link device refresh cycle
Take the steps according to the following flowchart.
* 1 The system specifications describe the whole system operations including the system functions
and processing specifications required for the C Controller system, user program processing,
functions, and performance specifications.
Figure 5.21 Link device refresh cycle setting flowchart
Calculating total link device refresh time
(This section (1))
Setting a temporary link device refresh cycle
(This section (2))
Test run of C Controller system (This section (3))
Checking C Controller system operation
System specifications satisfied?
(This section (4))
Link device refresh time is determined.
Actions for C Controller system malfunction
(This section (5))
(Resetting link device refresh cycle)
YES
NO
*1
(Page 5-24)
(Page 5-24)
(Page 5-24)
(Page 5-24)
(Page 5-26)