Mitsubishi Electric Q12DCCPU-V - Switching the Mode

16
TROUBLESHOOTING
16.5 Hardware Self-Diagnostic Function
16.5.1 Hardware self-diagnostic test and initialization setting of the Q12DCCPU-V
16 - 80
9
DEVICE DESCRIPTION
10
MULTIPLE CPU SYSTEM OVERVIEW
11
MULTIPLE CPU SYSTEM CONFIGURATION
12
CONCEPT OF MULTIPLE CPU SYSTEM
13
COMMUNICATIONS BETWEEN CPU MODULES
14
PARAMETERS ADDED FOR MULTIPLE CPU SYSTEMS
15
STARTING A MULTIPLE CPU SYSTEM
16
TROUBLESHOOTING
(c) Switching the mode
Set the RUN/STOP/MODE switch to "STOP", and select the mode by moving the
RESET/SELECT switch to the "SELECT" position.
The mode changes from No.1 2 3... 10 1 2...as shown in the table below
by every move of the switch, and the 7-segment LED indicates a numeric value
corresponding to the mode.
* 1 Can be selected for Q12DHCCPU-V with a serial number whose first five digits are "15102" or
later.
Table 16.14 Modes and corresponding LED indications
No. Mode 7-segment LED indication
1
Mode 0
(Mode 1 to 6)
2 Mode 1
3 Mode 2
4 Mode 3
5 Mode 4
6 Mode 5
7 Mode 6
8 Mode 7
9 Default IP setting
10
Module initialization setting
(Basic mode)
11
*1
Module initialization setting
(Extended mode)
Move "n" times.
STOPMODE
RUN
SEL.
RES.