Mitsubishi Electric Q12DCCPU-V - Connection with GX Works2;Gx Developer; When Accessing Another CPU of a Multiple CPU System; GX Works2; USB Connection

APPENDICES
Appendix 9 Connection with GX Works2/GX Developer
Appendix 9.1 When accessing another CPU of a multiple CPU system
APPX - 25
A
I
Appendix 9 Connection with GX Works2/GX Developer
This section explains the setting method of when connecting GX Works2/GX Developer to
a C Controller module.
This section does not cover precautions and tips on the use of GX Works2/GX Developer.
For precautions and tips on the use of GX Works2/GX Developer, refer to the following.
GX Works2/GX Developer Operating Manual
Appendix 9.1 When accessing another CPU of a multiple CPU system
(1) GX Works2
(a) USB connection
To access another CPU module of a multiple CPU system from the C Controller
module via USB, follow the procedure below.
1) Navigation window Select [Connection Destination].
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
2)
3)
4)
5)