Mitsubishi Electric Q12DCCPU-V - Switch Settings for I;O and Intelligent Function Modules; Timing of Writing the Switch Settings

4
FUNCTIONS
4.11 Switch Settings for I/O and Intelligent Function Modules
4 - 38
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
4.11 Switch Settings for I/O and Intelligent Function Modules
(1) What is the switch settings for intelligent function modules and interrupt
modules?
The switches of the Q series intelligent function modules and interrupt modules can
be set in C Controller setting utility.
(2) Timing of writing the switch settings
The switch settings are written from the C Controller module to each intelligent
function module and/or interrupt module when the C Controller system is powered on
or the C Controller module is reset.
Figure 4.15 Writing switch settings to a module
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Intelligent function module switch setting from <<I/O assignment settings>>
1) Writing
Writing at power-on or when C
Controller module is reset.
2)
Development
environment
(personal computer)