Mitsubishi Electric Q12DCCPU-V - When Creating a New System

15
STARTING A MULTIPLE CPU SYSTEM
15.2 Setting Parameters Added for Multiple CPU Systems
15.2.3 When creating a new system
15 - 7
9
DEVICE DESCRIPTION
10
MULTIPLE CPU SYSTEM OVERVIEW
11
MULTIPLE CPU SYSTEM CONFIGURATION
12
CONCEPT OF MULTIPLE CPU SYSTEM
13
COMMUNICATIONS BETWEEN CPU MODULES
14
PARAMETERS ADDED FOR MULTIPLE CPU SYSTEMS
15
STARTING A MULTIPLE CPU SYSTEM
16
TROUBLESHOOTING
15.2.3 When creating a new system
(1) For the Q12DCCPU-V
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
(To the next page)
Start
Connect to the C Controller module.
Start C Controller setting utility
"Number of CPUs" in the <<Multiple CPU settings>> tab
(setting required)
"Host CPU number" in the <<Multiple CPU settings>> tab
(optional)
Set the points to be occupied by one empty slot.
Default: 16 points
Set the number of CPU modules mounted on the main base unit
in the multiple CPU system.
Set this when checking the host CPU number.
Default: Not specified
"Points occupied by empty slot" in the <<System settings>> tab
(optional)