Mitsubishi Electric Q12DCCPU-V - Setting Parameters Added for Multiple CPU Systems; Development Environment (Personal Computer)

15 - 4
15.2 Setting Parameters Added for Multiple CPU Systems
15.2.1 System configuration
15
STARTING A MULTIPLE CPU SYSTEM
15.2 Setting Parameters Added for Multiple CPU Systems
This section provides the procedure for setting parameters for the multiple CPU system in
C Controller setting utility.
15.2.1 System configuration
The procedure for setting multiple CPU system parameters is explained by using the
system shown in Figure 15.2 as an example.
Figure 15.2 Example of multiple CPU system configuration
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
1
2
3
1 1 22
2 3 3
CPU 0 456731 2
8910 11 12 13 14 15
1
Ethernet
Development environment (personal computer)
Empty slot for future
CPU module addition
Slot No.
Power supply module
C Controller module
C Controller module
C Controller module
CPU (Empty)
Intelligent function module
Input module
Input module
Output module
Output module
Control CPU setting
Slot No.
Control CPU setting
Input module
Output module
Intelligent function module
Power supply module