Mitsubishi Electric Q12DCCPU-V - Setting the Number of Cpus (Required); Number of Cpus; Reserving an Empty Slot

14
PARAMETERS ADDED FOR MULTIPLE CPU
SYSTEMS
14.1 Parameter List
14.1.1 Setting the number of CPUs (required)
14 - 4
9
DEVICE DESCRIPTION
10
MULTIPLE CPU SYSTEM OVERVIEW
11
MULTIPLE CPU SYSTEM CONFIGURATION
12
CONCEPT OF MULTIPLE CPU SYSTEM
13
COMMUNICATIONS BETWEEN CPU MODULES
14
PARAMETERS ADDED FOR MULTIPLE CPU SYSTEMS
15
STARTING A MULTIPLE CPU SYSTEM
16
TROUBLESHOOTING
14.1.1 Setting the number of CPUs (required)
(1) Number of CPUs
In the <<Multiple CPU settings>> tab of C Controller setting utility, select the number
of CPU modules to be used in the multiple CPU system.
(2) Reserving an empty slot
To reserve an "Empty slot" for mounting a CPU module in the future, select "CPU
(Empty)" in the <<I/O assignment settings>> tab of C Controller setting utility.
( Page 12-1, Section 12.1)
(Example) When reserving one out of four CPU slots for future use
Set 4 for the Number of CPUs in <<Multiple CPU settings>>, and select "CPU
(Empty)" for Slot 3 (the 4th CPU module) in <<I/0 assignment settings>>.
Figure 14.1 Setting the number of CPUs
Figure 14.2 Reserving an empty slot
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Number of CPUs
"CPU (Empty)" setting