Mitsubishi Electric Q12DCCPU-V - System Memory

8
MEMORIES AND FILES
8.1 Memories of the C Controller Module
8.1.2 System memory
8 - 6
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
8.1.2 System memory
The system memory is a memory used to store data of the operating system, system
software, VxWorks image files, etc. of the C Controller module.
The system memory is controlled by the following drive name.
POINT
When debugging the user program using Workbench or Tornado, check that the
VxWorks image file in the system memory of the C Controller module is identical
with that of the development environment (personal computer). For the VxWorks
image file, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
Remark
The system memory data (file) are used in the system of the C Controller module
and not required to be used (or referred) in the user program.
Table 8.6 System memory and drive name
Memory name Drive name Remarks
System memory built in the C Controller module /SYSTEMROM Read only
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B