2
SYSTEM CONFIGURATION
2.4 Applicable Devices
2 - 25
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK
MODULES
6
PREPARATORY
PROCEDURES AND
SETTING
7
I/O NUMBER
ASSIGNMENT
8
MEMORIES AND FILES
2.4 Applicable Devices
This section introduces devices connectable to the C Controller module.
(1) CompactFlash card
One CompactFlash card can be installed for a C Controller module.
Use a CompactFlash card manufactured by Mitsubishi listed in the following table.
Failure to do so may cause a problem such as data corruption in the CompactFlash
card and system stop.
: Available, : N/A
CompactFlash cards have limited lives (the limited number of writes).
• For the live of QD81MEM and GT05-MEM, refer to the following.
Page 6-70, Section 6.8.5
• For the live of commercially available CompactFlash cards, refer to the
specifications of each product.
• For countermeasures against static electricity for commercially available
CompactFlash cards to comply with the EMC directives, refer to Page 6-
68, Section 6.8.4.
Table 2.9 Applicable CompactFlash cards
Model name
Applicable models
Description
Q12DCCPU-V Q06CCPU-V
GT05-MEM-128MC 128MB CompactFlash card
GT05-MEM-256MC 256MB CompactFlash card
QD81MEM-512MBC 512MB CompactFlash card
QD81MEM-1GBC 1GB CompactFlash card
QD81MEM-2GBC 2GB CompactFlash card
QD81MEM-4GBC 4GB CompactFlash card
QD81MEM-8GBC 8GB CompactFlash card
To Next Page
Loading...
