5
ACCESS VIA NETWORK MODULES
5.4 CC-Link IE Controller Network Module Access Function
5.4.4 Link device refresh setting
5 - 55
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK
MODULES
6
PREPARATORY
PROCEDURES AND
SETTING
7
I/O NUMBER
ASSIGNMENT
8
MEMORIES AND FILES
(2) Refresh parameters
The refresh parameters are parameters by which data are transferred from the link
devices (LX, LY, LB, and LW) of a CC-Link IE controller network module to the internal
link device buffers (LX, LY, LB and LW buffers) of the C Controller module for use in
the user program.
(a) Link refreshable devices
Up to 64 transfer settings are allowed for each CC-Link IE controller network
module.
The following transfer settings are available.
• Transfer the link side device (LX) data to the CPU side device (LX buffer).
• Transfer the link side device (LY) data to the CPU side device (LY buffer).
• Transfer the link side device (LB) data to the CPU side device (LB buffer).
• Transfer the link side device (LW) data to the CPU side device (LW buffer).
(b) Setting refresh parameters
Set refresh parameters in the Refresh parameter settings screen activated from
the <<Parameter settings>> tab of CC IE Control utility.
Figure 5.53 Refresh parameter settings screen
To Next Page
Loading...
