A - 27
HOW TO USE THIS MANUAL
This manual is intended to help you understand the system configurations, specifications,
functions, preparatory procedures, and troubleshooting of the C Controller module.
Utilize this manual, referring to the following.
This manual does not explain the SW3PVC-CCPU installation and uninstallation
procedures, utility operations, functions, and programming.
For details, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
Item Description
CHAPTER 1 Describes the features of the C Controller module.
CHAPTER 2
Describes system configurations that include the C Controller module, and
provides a list of the modules that are accessible from the C Controller
module.
CHAPTER 3 Describes the specifications and performance of the C Controller module.
CHAPTER 4 Describes the functions of the C Controller module.
CHAPTER 5 Describes the network module access function of the C Controller module.
CHAPTER 6
Explains the procedures for starting the system operation using the C
Controller module.
CHAPTER 7
Describes the stage number setting for extension base units and I/O number
assignment.
CHAPTER 8 Describes the memories of the C Controller module.
CHAPTER 9 Describes devices that can be used with C Controller modules.
CHAPTER 10 to
CHAPTER 15
Describes multiple CPU system configurations, I/O numbers,
communications among programmable controller CPUs, I/O modules, and
intelligent function modules, and how to start a multiple CPU system.
CHAPTER 16
Provides corrective actions to be taken for respective errors, and the error
codes that may be generated during function execution.
To Next Page
Loading...
