Mitsubishi Electric Q12DCCPU-V - Page 291

6
PREPARATORY PROCEDURES AND SETTING
6.10 Initializing/Changing Mode of C Controller Module
6.10.1 Initializing/Changing mode of Q12DCCPU-V
6 - 73
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(3) Applications
The C Controller module can be restored by setting it to the initialized status if it does
not operate normally by the following reasons.
• Execution of a user program registered to a script file
• Unknown IP address or login user set to the C Controller module
Figure 6.54 Operating procedure
Error
Perform the module initialization setting
procedure.
( )
Please consult your local Mitsubishi
service center or representative,
explaining a detailed description of the
problem.
End
No
Yes
No
Yes
Execute the "Default IP setting" mode.
( )
Is the C Controller module
operating normally?
Is the C Controller module
operating normally?
Page 6-75, Section 6.10.1 (5)
Page 6-77, Section 6.10.1 (6)