Mitsubishi Electric Q12DCCPU-V - Page 294

6 - 76
6.10 Initializing/Changing Mode of C Controller Module
6.10.1 Initializing/Changing mode of Q12DCCPU-V
6
PREPARATORY PROCEDURES AND SETTING
POINT
1. When the "Default IP setting" mode is executed with a CompactFlash card
inserted in the C Controller module, the script file "STARTUP.CMD" in the
CompactFlash card will not be deleted.
To set the script file in the CompactFlash card back to its original status, edit it
on a personal computer.
2. If the C Controller module does not operate normally even after execution of
the "Default IP setting" mode, perform the module initialization setting
procedure.
( Page 6-77, Section 6.10.1 (6))