Mitsubishi Electric Q12DCCPU-V - Page 538

16 - 67
16.4 Error Code List
16.4.1 Error codes and actions (for errors occurred in function execution)
16
TROUBLESHOOTING
* 1 In a single CPU system, reset the C Controller module.
In a multiple CPU system, reset CPU No. 1.
Table 16.8 Common error codes returned by bus interface and MELSEC data link functions (continued)
Return value
(HEX)
Error description Corrective action
-28664
(0x9008)
Data transmission area occupied. Retry.
-28665
(0x9007)
No registration data error
Reboot the operating system.
*1
-28666
(0x9006)
Data length error
Reboot the operating system.
*1
-28668
(0x9004)
Reply data stored error
Reply data has already been stored.
Resend the request.
-28669
(0x9003)
Area No. error
The specified area No., offset address, or mode is out of range.
Check the area No., offset address, or mode.
-28671
(0x9001)
Module identification error
Check the parameter.
Check the specified module.
Reboot the operating system.
*1
-28672
(0x9000)
Processing code error
Reinstall software package.
Reboot the operation system.
*1