APPENDICES
Appendix 2 External Dimensions
Appendix 2.1 Q12DCCPU-V
APPX - 7
A
I
* 1 The bend radius (R1: reference value) near the connector must be "cable's outside diameter 4"
or more when a twisted pair cable is used.
* 2 The bend radius (R2: reference value) near the connector must be "cable's outside diameter 4"
or more when an RS-232 cable is used.
For the Q12DCCPU-CBL, "cable's outside diameter 4" is 22 mm (0.87 inches).
(2) Q12DCCPU-CBL
(Unit: mm (inches))
Figure APPX.1 External dimensions (continued)
(Unit: mm (inches))
Figure APPX.2 External dimensions
Cable's outside diameter 4
R2
*2
R1
*1
R1
*1
37 (1.47) (For Q12DCCPU-CBL)
530 20 (20.87 0.79)
14.6
(0.57)
14.6
(0.57)
34 (1.34)
15
(0.59)
To Next Page
Loading...
