Mitsubishi Electric Q12DCCPU-V - Page 583

APPENDICES
Appendix 7 List of Special Registers
APPX - 19
A
I
Table APPX.17 Special registers (continued)
Number Name Description Detailed description
Setting side
(setting time)
SD5
to
SD15
Common error
information
Common error
information
7) Base No./power supply No.
S
(Error)
SD16
to
SD26
Error individual
information
Error individual
information
• Individual information corresponding to the error code (SD0) is stored.
• Two types of information are stored.
• Error individual information type can be determined by "individual information
category code" in SD4.
(The value of the individual information category code stored in SD4 corresponds
to 3) and 5) below.)
3) Time (actual measurement value)
5) Parameter No.
S
(Error)
SD60
Fuse blown
module No.
Fuse blown
module No.
• The latest I/O number of the module that generated the blown fuse is stored.
S
(Error)
SD61
I/O module
verification error
No.
I/O module
verification error
No.
• The latest I/O number of the module that generated the I/O module verification
error is stored.
S
(Error)
1: Error occurring in power supply 1
2: Error occurring in power supply 2
Redundant power supply module mounting
on POWER 1 slot of the redundant base
unit (Q38RB, Q68RB, and Q65WRB)
"Power supply 1" :
SD5
SD6
SD7
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
No. Item
Base No.
Power supply No.
(Empty)
Redundant power supply module mounting
on POWER 2 slot of the redundant base
unit (Q38RB, Q68RB, and Q65WRB)
"Power supply 2" :
SD16
SD17
SD18
SD19
SD20
SD21
SD22
SD23
SD24
SD25
SD26
No. Item
Hr.: in units of 1ms (0 to 65535ms)
(Empty)
(Empty)
SD17
SD18
SD19
SD20
SD21
SD22
SD23
SD24
SD16
SD25
SD26
Parameter No.
(Empty)
No. Item