APPX - 38
Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
APPENDICES
3) Set the personal computer side interface as follows, and click the
button.
• Select "USB" for "PC side I/F".
4) Set the programmable controller side interface as follows, and click the
button.
• Select "CPU module" for "PLC side I/F".
• Select "Q12DC-V" for "CPU type".
5) Set the network as follows, and click the button.
• Select "Host station" for "Station type".
• Select the number of the CPU module to be accessed for "Multiple CPU".
Next >
Next >
Next >
To Next Page
Loading...
