Mitsubishi Electric Q12DCCPU-V - Page 63

2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.4 System configuration overview
2 - 11
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(2) When using the slim type base unit (Q3 SB)
Precautions
• The slim type main base unit has no extension cable connector.
Connection of extension base units or GOT (in a bus topology) is not allowed.
Figure 2.9 Configuration example of a system using a slim type base unit
Table 2.2 Restrictions on the system configuration
Maximum number of I/O
modules
5 modules
Slim type base unit model Q32SB, Q33SB, Q35SB
Slim type power supply
module model
Q61SP
Slim type
power supply
module
C Controller module
Q35SB (5 slots occupied)
....
....
I/O number
Slot number
00 to 1F 20 to 3F 40 to 5F 60 to 7F 80 to 9F
CPU 0 1 2 3 4
Slim type main base unit A 32-point module is mounted on each slot
...