Mitsubishi Electric Q12DCCPU-V - Page 83

2
SYSTEM CONFIGURATION
2.4 Applicable Devices
2 - 31
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
(b) Access to a programmable controller CPU via a network module controlled by a C
Controller module
GX Works2/GX Developer connected to a programmable controller CPU can
access another programmable controller CPU on another station via a network
module (CC-Link module, MELSECNET/H module, or CC-Link IE controller
network module) controlled by a C Controller module.
However, GX Developer cannot access a programmable controller CPU on
another station via a serial communication module controlled by a C Controller
module.
1) Other station access via CC-Link and MELSECNET/H
Figure 2.15 Other station access via CC-Link and MELSECNET/H
MELSECNET/H
GX Works2/GX Developer
CC-Link
Transfer Setup in GX Works2/GX Developer
Programmable controller CPU
Programmable controller CPU
Accessible
via network module controlled
by the C Controller module!