Moog MSD Servo Drive Series

1.4Pictograms
The pictograms used in this Device Help have the following meaning for the user:
NOTE
 Usefulinformationorreferencestootherdocuments.
Step Action
1.
(Number)
INSTRUCTIONS
Operating step performed by either the user or the system.
For the pictograms for “safety information and warnings” used in this Device Help,
see the Section "Safety information and warnings" on page 15.
1.5Disclaimer
Observing all the instructions and information in the documentation for Moog GmbH
devices is a prerequisite:
 forsafeoperationand
 toattaintheperformancecharacteristicsandproductcharacteristics
described.
Moog GmbH assumes no responsibility for bodily injury, property damage or
financial losses resulting from failure to observe the information and instructions in
the documentation.
MOOG
ID
No.: CB40859-001 Date: 02/2018
MSD Servo Drive- Device Help
13
1 General information
1.6TechnicalHelpline
If you have any technical questions concerning the planning, configuration or
commissioning for your device, our Technical Helpline staff will be more than happy
to assist you quickly and effectively.
Address: MoogGmbH
Hanns-Klemm-Strasse28
D-71034Böblingen
Phone: +497031622-0
E-mail: drives-support@moog.com
If you need service assistance, the Moog specialists will be pleased to be of
assistance.
Service - Please contact us:
Phone: +497031622-0
E-mail: info.germany@moog.com
NOTE
 Fordetailedinformationonourservices,pleasevisitourwebsite,
www.moog.com/industrial.