Moog MSD Servo Drive Series

2Safety
2.1Overview
Our devices are designed and built with the latest technology and comply with all
recognized safety rules and standards. Nevertheless, there are potential hazards
that may arise during their use. In this chapter:
 Weprovideinformationregardingtheresidualrisksandhazardsposedby
ourdeviceswhentheyareusedasintended.
 Wewarnyouaboutforeseeablemisuseofourdevices.
 Wepointoutthatitisnecessarytoexerciseduecareandcautionandgo
overmeasuresdesignedtominimizerisk.
2.2Foryourownsafety
NOTE
 Wheninstallingandcommissioningyourdevice,youmust
observethedocumentationfortherelevantdevicefamily!
Our devices are designed to be fast and easy to operate. For your own safety and to
ensure reliable operation of your machine, take note of the following:
Step Action
1.
Precautions to avoid injury and damage to property
Ensure there is no possibility of bodily injury or damage to the machine
when testing and commissioning the device. To this end, make sure to
observe Section "Safety information and warnings" on page 15 as well.
2.3Safetyinformationandwarnings
Our devices may pose certain hazards. Accordingly, you must observe the following
safety information and warnings.
WARNING! Risk of injury posed by uncontrolled rotation!
Improper conduct can lead to serious injury or death.
 Beforecommissioningmotorswithafeatherkeyatthe
shaftend,thekeymustbesecuredtopreventitfrom
beingejectedifthisisnotalreadypreventedbydrive
elementssuchaspulleys,couplings,etc.
CAUTION! Your system/motor may be damaged if put into operation in
an uncontrolled or inappropriate manner.
Improper conduct can cause damage to your system /
machine.
 Beforethe“Start”step,makeabsolutelysurethatavalid
setpointhasbeenentered,astheconfiguredsetpoint
willbeimmediatelytransmittedtothemotorafterthe
motorcontrolfunctionstarts,whichmayresultinthe
motoracceleratingunexpectedly.
MOOG
ID
No.: CB40859-001 Date: 02/2018
MSD Servo Drive- Device Help
15
2 Safety