Omron F3SG-SRB Series - Page 314

286
Chapter5 Mounting
F3SG-SR
User’s Manual
Wiring and Installation
4. Fully loosen the Mounting Screw (hexagon socket head cap screw (M4×22)) of the Adjustable Side-
Mount Bracket. (Fig. 4) Then slide the hooks of the Brackets (1) and (2) in the groove of the backside
of the sensor housing. (Fig. 5)
5. Securely tighten the Mounting Screw to fix the Adjustable Side-Mount Bracket to the sensor housing.
The recommended torque to tighten the Mounting Screw of the Adjustable Side-Mount Bracket is 3.0
N•m. Then loosen the Alignment Screw (hexagon socket head cap screw (M4×22)) of the Adjustable
Side-Mount Bracket. (Fig. 6)
Fig. 4 Fig. 5
Mounting Screw
(hexagon socket head
cap screw (M4×22))
Fit the hooks of Adjustable
Side-Mount Brackets to the
groove of the backside of
the housing
Loosen
Bracket (1)
Bracket (2)
Hoo
k
Alignment Screw
(hexagon socket head
cap screw (M4×22))
Mounting Screw
1. Securely tighten
2. Securely tighten
Fig. 6
Mounting Screw
Alignment Screw