Panasonic FP Series User Manual

Pulse output instructions
1025
Part III FP Instructions
Performing a forced stop may cause the elapsed value at the PLC output side to
differ from the elapsed value at the motor input side. Therefore, you must execute
a home return after pulse output has stopped.

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model