Panasonic FP Series User Manual

Table of Contents
11
CTD Down counter
318
CTUD Up/down counter
320
14. Timer instructions.................................................................................. 323
TOF Timer with switch-off delay
324
TON Timer with switch-on delay
326
TP Timer with defined period
328
ADD_TIME Add TIME
330
CONCAT_TIME_INT Concatenate INT values to form a time
331
DIV_TIME_INT Divide TIME by INTEGER
332
DIV_TIME_DINT Divide TIME by DOUBLE INTEGER
333
DIV_TIME_REAL Divide TIME by REAL
334
MUL_TIME_INT Multiply TIME by INTEGER
335
MUL_TIME_DINT Multiply TIME by DOUBLE INTEGER
336
MUL_TIME_REAL Multiply TIME by REAL
337
SPLIT_TIME_INT Split a time into INTEGER values
338
SUB_TIME Subtract TIME
339
Part III FP instructions
15. Arithmetic instructions .......................................................................... 341
F20_ADD 16-bit addition
342
F21_DADD 32-bit addition
344
F22_ADD2 16-bit addition, destination can be specified
346
F23_DADD2 32-bit addition, destination can be specified
348
F40_BADD 4-digit BCD addition
350
F41_DBADD 8-digit BCD addition
352
F42_BADD2 4-digit BCD addition, destination can be specified
354
F43_DBADD2 8-digit BCD addition, destination can be specified
356
F35_INC 16-bit increment
358
F36_DINC 32-bit increment
360
F55_BINC 4-digit BCD increment
362
F56_DBINC 8-digit BCD increment
364
F25_SUB 16-bit subtraction
366
F26_DSUB 32-bit subtraction
368
F27_SUB2 16-bit subtraction, destination can be specified
370
F28_DSUB2 32-bit subtraction, destination can be specified
372
F45_BSUB 4-digit BCD subtraction
374
F46_DBSUB 8-digit BCD subtraction
376
F47_BSUB2 4-digit BCD subtraction, destination can be specified
378

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model