Panasonic FP Series User Manual

Conversion instructions
633
Part III FP Instructions
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
When the variable start is set to TRUE, the function is carried out. For the variable at s1, you
define an ARRAY with a minimum of four word elements because 8 ASCII characters require 8
bytes of memory and the function cannot convert more than 8 bytes. In this example, the value for
s2 is entered directly at the contact pin.

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model