Panasonic FP Series User Manual

High-speed counter instructions
908
Part III FP Instructions
IF DF(start) THEN
F167_HighSpeedCounter_Reset(n_diHscChannel := 0,
s_diTargetValue := -200,
d_Y => out_0);
Assign a number to the input variable (e.g. Monitor  Monitor Header, click the
variable, enter the value, press <Enter>), or replace the input variables with
numbers.
When programming with structured text, enter the following:
END_IF;

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model