Chapter 3: FRU Removal and Replacement Procedures
Replacing Node Expansion Cards
132 Quantum DXi6900 G1 User’s Guide
Note: The previous mapping details can be found from the
Collect Log under Node1-Collection>io-
info>FCHostAccessGroupsNode1.conf.
Note: The 16 Gb Fibre Channel card conversion will reduce the
amount of Fibre Channel ports from six to four. Fibre
Channel ports 2 (F2) and 3 (F3) will no longer be available.
If one of the reduced ports was a PTT port, you will need to
reconfigure a new port for PTT.
a Click Add.
The Map Remote Hosts, Define Groups page displays (see
Figure 75).
To Next Page
Loading...
