Quantum DXi6900

Chapter 2: Service Menus
Accessing the DXi6900 G1 Service Menu
Quantum DXi6900 G1 User’s Guide 43
• Locate an Array - Locates a specific Array module in the system.
• Add an Array - Adds an Array module to the system.
• Add a EBOD to an Array - Adds an Expansion module (EBOD) to an
existing Array module (RBOD) in the system.
• Upgrade Array Firmware - Upgrades the firmware on an Array
module or Expansion module.
• Display Array BBU status - Displays the status and age of the BBU
in the selected Array module.
• Reset Array BBU date - Resets the age counter of the BBU in the
selected Array module. Use this option after installing a replacement
Array module BBU.
• Re-enable Array tray alarms - Re-enables tray alarms on all Array
modules.
• Show Premium Feature Info - Displays the Premium Feature Key
(PFK) licenses installed on each Array module.
• Upload Turbo PFK file - Installs a Turbo Premium Feature Key (PFK)
on the selected Array module controller. When an Expansion
module (EBOD) is added to the DXi6900 G1 during a capacity
expansion, a Turbo PFK must be uploaded to the Array module
(RBOD) to which the Expansion module is connected.
• Show Data Assurance Status - Shows the status of Data Assurance
for each tray.
• Show Encryption Status - Displays the Data-at-Rest Encryption
status for each LUN.
• Discover and Name Arrays - Automatically discovers all SAS-
attached Array modules.
• Reset Tray(s) - Resets one or more Array controllers. (This may
disrupt other DXi software processes, such as enclosure services.)
• Show Trays Health Status - Displays the health status for the
selected Array module.
• Show Trays Info - Displays serial numbers, volumes, and installed
PFKs for all Array and Expansion modules.
• Show Trays Pools/Volumes - Displays volumes and disk pools for
the selected Array module.