Getting Started
14
1
6. {Interrupt} key
Press to make interrupt copies during a
copy run. See “Interrupt Copy”, Copy/Doc-
ument Server Reference.
7. {Energy Saver} key
Press to shift to and from Low Power mode.
See “Saving Energy”.
8. {Clear Modes} key
Press to clear previously entered copy job
settings.
9. {Program} key (copier and scanner
mode)
Press to register frequently used settings,
or to recall registered settings.
10. {Stop} key
Press to stop a job in progress.
11. {Start} key
Press to start copying, or to scan or print
documents stored on the Document Server.
12. {Sample Copy} key
Press to make a single set of copies or
prints to check for print quality before
making multiple sets. See “Sample copy”,
Copy/ Document Server Reference.
13. {Clear} key
Press to delete a number entered.
14. {q} key (Enter key)
Press to enter a numerical value.
15. Number keys
Use to enter the desired number of cop-
ies, or data for a selected function.
16. {New Job} key
Use this key to set up the next copy job
while a copy job or storing data in the
Document Server is in progress.
17. Data In indicator (printer mode)
Lights up when data is coming from the
printer.
18. {Registered Program} key/{Other
Function} key
Calls up registered functions.
19. Function status indicators
These show the status of the functions.
• Green: active.
• Red: interrupted. Press the function
key to change the display, and then
follow the displayed instructions.
20. Function keys
Press to display the operation screen of
one of the following functions:
•Copy
• Document Server
•Printer
• Scanner
The indicator of the selected function
goes on. See “Changing Modes”.
21. {Counter} Key
Press to check or print the total number of
copies made. See “Counter”, General Set-
tings Guide.
22. {User Tools} key
Press to change the default settings and
conditions to meet your requirements.
See “Accessing User Tools (System Set-
tings)”, General Settings Guide.
23. {Tray Paper Settings} key
Specify the paper tray settings for delivery.
24. Display panel
Shows the operation status, error messages,
and function menus.
To Next Page
Loading...