10
❖ Input / Output
❖ Administrator Tools
Size You can set the size of the stamp printed in Stamp Text mode.
Superimpose You can have the Stamp Text printed in white when it overlaps
black parts of the image.
Stamp Setting You can specify how Stamp Text is printed.
Item Description
SADF Auto Reset In SADF mode, an original must be set within a specified time af-
ter the previous original has been fed. You can adjust this time
from 3 to 99 seconds in increments of 1 second. The timing is set
to “5 second(s)” by default.
Copy Eject Face Method in
Glass Mode
You can specify the way in which copies are delivered when copy-
ing an original placed on the exposure glass.
Memory Full Auto Scan
Restart
When memory becomes full while scanning originals, the ma-
chine can make copies of scanned originals first, and then auto-
matically proceed scanning remaining originals.
Sort / Stack Shift Tray Set-
ting
You can specify whether to shift the Shift Tray in sort mode or
stack mode.
Insert Separation Sheet You can specify the number of copy pages for inserting the Sepa-
ration Sheet from 1 to 999 pages in increments of 1 page.
Staple Position Specify which Top 2 staples or Bottom shown on the initial display
with priority. The optional Finisher SR5000 is required to use this
function.
Punch Type Specify which punch type (2 holes or 3 holes) has priority to be
shown on the initial display. The optional Finisher SR5000 and
Multi-hole Punch Unit are required to use this function.
Finisher: Staple Position Specify the stapling position. The optional Finisher SR5000 is re-
quired to use this function.
Finisher: Punch Type Specify the punch type. The optional Finisher SR5000 and Multi-
hole Punch Unit are required to use this function.
Simplified Screen: Finish-
ing Types
You can select which key is displayed with higher priority for
“Finishing Types” on the Simplified Screen.
Item Description
Menu Protect Using Menu Protect, you can limit the settings available to users
other than the administrator.
Item Description
To Next Page