Copier Functions
63
2
A Press [Reduce/ Enlarge].
B Press [Dir. Size Mag. Inch].
C Enter the horizontal size of the original with the number keys, and then
press the {q} key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
D Enter the horizontal size of the copy with the number keys, and then press
the {q} key.
E Enter the vertical size of the original with the number keys, and then press
the {q} key.
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
F Enter the vertical size of the copy with the number keys, and then press the
{q} key.
G Press [OK] twice.
H Place the originals, and then press the {Start} key.
Note
❒ To change a length in steps
C
to
F
, press the key you wish to change and
enter the new value.
To Next Page