Appendix
206
5
❖ Front Cover, Front/Back Cover
• If Blank mode is selected, the cover is not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings
made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• At Mode Selected… Depends on the setting done from Cover Sheet
Tray.
• Full Time… Depends on the setting done from Paper Type.
See “Tray Paper Settings”, General Settings Guide.
❖ Designate
• When [Combine (1 Sided→2 Sided)] has been selected, specified pages will al-
ways be copied on the front of copies, as in Chapters mode.
• In “Tray Paper Settings”, if you selected [At Mode Selected] for [Display Time],
the machine refers to the settings in “Tray Paper Settings” to ascertain
whether the front and back covers are copied one-sided or two-sided. If
you selected [Full Time] for [Display Time], the machine refers to the settings
in “Paper Type” to ascertain whether the front and back covers are copied
one-sided or two-sided. See “Tray Paper Settings”, General Settings
Guide.
• If Blank mode is selected, the designate sheet is not counted as a copy.
❖ Slip sheet
• Tab stock are possible to use as slip sheets.
• If you do not copy onto slip sheets, they are excluded from the number of
copies counted.
To Next Page