Ricoh MT-C1 - Page 549

SERVICE PROGRAM MODE TABLES 15 February 2006
5-76
5507 Supply Alarm
001 Paper Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the paper supply.
DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified number
transfer sheets for each paper size (A3, A4, B4, B5,
DLT, LG, LT, HLT)
002 Staple Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the stapler installed
in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
003 Toner Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the toner end. DFU
0: Off, 1: On
If you select “1” the alarm will sound when the copier
detects toner end.
128* interval: Others
132* Interval: A3
133* Interval: A4
134* Interval: A5
141* Interval: B4
142* Interval: B5
160* Interval: DLT
164* Interval: LG
166* Interval: LT
172* Interval: HLT
The “Paper Supply Call Level: nn” SPs specify the
paper control call interval for the referenced paper
sizes. DFU
[00250 ~ 10000 / 1000 / 1 Step]