15 February 2006 SERVICE PROGRAM MODE TABLES
5-101
Service
Tables
5845* Delivery Server (B064)
These are delivery server settings.
001 FTP Port No.
[0~65535/1]
002 IP Address
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be used with the initial system setting.
[0~FFFFFFFF/1]
003 Retry Interval
Sets the time interval before the machine tries again when it goes back to standby
after an error occurs during an image transfer with the delivery scanner or SMTP
server.
[60~900/1]
004 Number of Retries
Sets the number of times the machine tries again before it returns to standby after
an error occurs during an image transfer with the delivery or SMTP server.
[0~99/1]
005 Capture Server IP Address
Sets the capture server IP address for the capture feature.
[0~0xFFFFFFF]
006 Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a test
error occurs during document transfer with the NetFile application and an external
device.
[0~999/1]
007 Delivery Options
Connects to the Scan Router server for delivery of scanned documents.
[0~1/1]
0: No connection to Scan Router delivery server
1: Connected to Scan Router server for delivery of scanned documents.
008 IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary delivery
server for Scan Router. This SP lets you set only the IP address, and does not
refer to the DNS setting.
To Next Page
Loading...
