SERVICE PROGRAM MODE TABLES 15 February 2006
5-144
7617 Parts PM Counter Display
001 Normal Japan Only
002 DF Japan Only
7618 PM Parts Counter Reset Japan Only
001 Normal Press Execute to clear the parts replacement alarm counter for the
main machine.
002 DF Press Execute to clear the parts replacement alarm counter for the
ADF.
7618 Parts PM Counter Reset (B140/B246)
001 Copy Paper Standard Clears the counter of SP7617- 001.
Japan Only
002 Copy Paper Standard Clears the counter of SP7617- 002
Japan Only
7801* ROM No./Firmware Version Displays the ROM version numbers of the main
machine and connected peripheral devices.
7803* PM Counter Display Displays the PM count since the last PM.
7804* PM Counter Reset Resets the PM count.
7807* SC/Jam Counter Reset Press Start to reset the SC and jam counters.
7808* Counters Reset (B064) Pressing the # key will reset all counters, except
for the following:
• Optional card/key counters
• Total electronic counts
• Copy count
• Print count
• Duplex count
• Staple count
• A3/DLT count
• P/O count
• C/O count
7810* Key Operator Code Clear
(B064)
Press # to clear the key operator code if the
customer key operator forgets the password and
the machine cannot be used.
7811* Original Feed Count Clear (B064)
Clears the original total display, displayed with SP7002-***. To clear, press .
To Next Page
Loading...
Need help?
General
