Rohde & Schwarz R&S FSL3 - Page 1260

R&S FSL SENSe Subsystem (CATV, K20)
1300.2519.12 6.501 E-11
[SENSe<1|2>:]DDEMod:SRATe
This command defines the symbol rate.
The numeric suffixes <1|2> are irrelevant.
Parameter
<numeric_value>
E
xample
DDEM:SRAT 1000000
Sets the symbol rate to 1.0 MSymb/s
Characteristics
RST value: 6.9 MSYMB/S
SCPI: device–specific
Mode
CATV