Rohde & Schwarz R&S FSL3 - Calculate:limit Subsystem (WLAN, K91; K91 N)

CALCulate:LIMit Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.674 E-11
CALCulate:LIMit Subsystem (WLAN, K91 / K91n)
The CALCulate:LIMit subsystem contains commands for the limit lines and the corresponding limit
checks.
Commands of the CALCulate:LIMit Subsystem
– CALCulate<1|2>:LIMit<1...8>:FAIL?
– CALCulate<1|2>:LIMit<1>:ACPower:ACHannel?
– CALCulate<1|2>:LIMit<1>:ACPower:ACHannel:RESult?
– CALCulate<1|2>:LIMit<1>:ACPower:ALTernate?
– CALCulate<1|2>:LIMit<1>:ACPower:ALTernate:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:ALL
– CALCulate<1|2>:LIMit<1>:BURSt:ALL:RESUlt?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:EVM[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:ALL:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:DATA[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:DATA[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:DATA:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:DATA:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:EVM:PILot:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:FERRor[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:FERRor[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:FERRor:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:FERRor:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset[:AVERage]:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset:MAXimum
– CALCulate<1|2>:LIMit<1>:BURSt:IQOFfset:MAXimum:RESult?
– CALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror[:AVERage]
– CALCulate<1|2>:LIMit<1>:BURSt:SYMBolerror[:AVERage]:RESult?