Rohde & Schwarz R&S FSL3 - Calculate:burst Subsystem (WLAN, K91; K91 N)

R&S FSL CALCulate:BURSt Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.673 E-11
CALCulate:BURSt Subsystem (WLAN, K91 / K91n)
The CALCulate:BURSt subsystem checks the IQ measurement results.
Commands of the CALCulate:BURSt Subsystem
– CALCulate<1|2>:BURSt[:IMMediate]
CALCulate<1|2>:BURSt[:IMMediate]
This command forces the IQ measurement results to be recalculated according to the current
settings.
This command is an event and therefore has no *RST value and no query.
Example
CALC1:BURS
Starts the recalculation of the IQ measurement results.
Characteristics
RST value: –
SCPI: device–specific
Mode
WLAN